Rank: Newbie
Joined: 6/6/2017(UTC)
Posts: 2
Was thanked: 2 time(s) in 2 post(s)
|
Hope you are well.
We do have a challenge we hope you may advise us about.
We have two Eurotherm Paperless Recorders (6180A). These are connected to our OPC server computer via Ethernet cable.
We read information from the recorders using Eurotherm OPC server (Eurotherm ModbusServer) and, using MatrikonOPC Data Manager, we move this information to SimaticNET OPC Server (SIEMENS OPC Server). The two servers are installed on the same computer.
Recently we have started getting errors in the data manager on the shared points. The error displayed on all the items is "Error Item Write Error: Not enough storage is available to complete this operation"
We have checked on the OPC server computer and we have sufficient storage on both the C:\ and D:\ drives. We have also deleted the temp files because we thought that might be an issue. We do not know what else to check.
If you may know what we can possibly check, it will help us greatly.
Thank you.
|
 1 user thanked Tobias Kiiza for this useful post.
|
|
|
|
Rank: Advanced Member
Joined: 10/21/2014(UTC)
Posts: 105
Was thanked: 35 time(s) in 32 post(s)
|
Here is an article from Microsoft which may be of use: https://support.microsof...to-complete-this-operatiIf you are unable to find the cause, I would suggest contacting Matrikon OPC Support at support@matrikonopc.com
|
1 user thanked Roger Fortune for this useful post.
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
